Fluorescent Neon Green Pigment in Soap

Description

Fluorescent Neon Green Pigment in Soap

Soap Test Results

We tested Green Neon Fluorescent Pigment in our cold process soap and it performed brilliantly in the high pH, alkaline environment.

It is a very potent pigment so you don’t have to use a lot of it to get a good solid colour.

Use between 0.25g of Green Neon Fluorescent Pigment per 100g of cold process soap to achieve a blinding gorgeous green.

Ingredients and Applications

INCI: Polyester-3, Pigment Green 7 (CI74260)
Packaging: Resealable bags
Applications by Region:

EU & UK – Soap & Bath Products, Nail Polish

US – Soap & Bath Products, Nail Polish

✓Vegan, cruelty free and ethically sourced.

✓MSDS are available here

Although every effort has been made to ensure that the applications are correct for your region please check with your local regulations.

Usage rates and instructions for mixing in cold process soap

Cold process soap use – 0.25g per/100g of soap batter OR 1/2 teaspoon per pound of oil OR 1.25g neon pigment per/450g of oil.

To ensure that your fluorescent pigment is thoroughly mixed in your cold process soap you can do the following –

1. Separate a little bit of your soap batter and mix your neon pigment into this to create a neon pigment “slurry.”

You can use a stick blender if it’s quite a large amount of soap or use a small paint mixer like a Badger mixer.

2. You can also add your neon pigment to a small amount of oil (i.e. a teaspoon or table spoon so that you do not end up with too much excess oil in your batch).

So select a liquid oil that you use in your recipe and stir your neon pigment into this..

3. Then add your oil fluorescent pigment “slurry” to your main batch of soap and stick blend or use the paint mixer to incorporate the neon pigment colour.

PLEASE NOTE: make sure to use a stick blender or paint mixer to fully disperse your neon pigment into your soap batter.

If you do not do this you might end up with muddy colours because the neon pigment is not properly dispersed into your soap.

Usage rates and instructions for mixing in melt and pour soap

Melt and pour soap use –1/8 teaspoon per/pound of soap OR 0.5g per/450g of soap

1. You can add your fluorescent pigment to a small amount of melted soap, mix thoroughly and add this to your main batch.

2. Add your neon pigment to a teaspoon or tablespoon of glycerine or isopropyl alcohol, mix thoroughly and add this to your main batch of soap.